New Millennium Building Systems

Form Deck

Form Deck

Form Deck

Form deck is used extensively in floor construction as an economical form to support concrete slabs during construction. All of our deck products meet required steel deck certifications in accordance with the specifications of the Steel Deck Institute.

Form deck is available in lengths from 6'-0" to 40'-0". Please check with your local New Millennium facility for lengths outside these parameters. Conforms to ASTM A1008/A1008M for uncoated and painted deck, A653/A653M for galvanized deck. Approved by UL, LLC and listed in the UL and ULC Fire Resistance Directories.

Yield strength up to 80ksi. Refer to published tables for the minimum yield strength used for each deck type, contact New Millennium for availability of higher yield strengths when required, or use our deck specification tool to view load tables with commonly available non-standard yield strengths and/or gages.

0.6FD, 0.6FDV Form Deck

Type 0.6FD form deck is used extensively in floor construction as an economical form to support concrete slabs during construction. Specifying 0.6FD deck may eliminate the need for expensive temporary shoring. Floor systems using 0.6FD deck are some of the most economical floors available.

  • Available with nested side laps only
  • Available as a vented deck, type 0.6FDV is manufactured with slot vents in the bottom flutes, the openings equal 0.5% of total surface
  • 0.6FD and 0.6FDV are UL approved. 0.6FD is ICC approved
FD Deck FD deck dimensions
S-Dek, SV-Dek Form Deck

S-Dek is a 9/16″ deep, permanent form deck system for reinforced concrete (145pcf normal weight) slabs. The deck system can also be used as a roof or lightweight insulating concrete roof deck system.

  • Available in four (4) steel gage thicknesses
  • Available as a vented deck, type SV-Dek is manufactured with slot vents in the bottom flutes, the openings can be adjusted from .25% - 1.25%
  • Types SD-Dek and SDV-Dek are ICC and UL approved
S-Dek, SV-Dek Form Deck
S-Dek, SV-Dek Form Deck dimensions
HD-Dek, HDV-Dek Form Deck

HD-Dek is a 15/16″ deep, permanent form deck system for reinforced concrete (145pcf normal weight) slabs. The deck system can also be used as a roof or lightweight insulating concrete roof deck system.

  • Available in four (4) steel gage thicknesses
  • Available as a vented deck, type HDV-Dek is manufactured with slot vents in the bottom flutes, the openings can be adjusted from .25% - 1.00%
  • Types HD-Dek and HDV-Dek are ICC and UL approved
HD-Dek, HDV-Dek Form Deck
HD-Dek, HDV-Dek Form Deck dimensions
1.0FD, 1.0FDV Form Deck

Type 1.0FD form deck is used extensively in floor construction as an economical form to support concrete slabs during construction. Specifying 1.0FD deck may eliminate the need for expensive temporary shoring. Floor systems using 1.0FD deck are some of the most economical floors available.

  • Available with nested side laps only
  • Available as a vented deck, type 1.0FDV is manufactured with slot vents in the bottom flutes, the openings equal 0.5% of total surface
  • 1.0FD and 1.0FDV are UL approved. 1.0FD is ICC approved
1.0FD Deck
1.0FD deck dimensions
EHD-Dek, EHDV-Dek Form Deck

HD-Dek is a 1 5/16″ deep, permanent form deck system for reinforced concrete (145pcf normal weight) slabs. The deck system can also be used as a roof or lightweight insulating concrete roof deck system.

  • Available in four (4) steel gage thicknesses
  • Available as a vented deck, type HDV-Dek is manufactured with slot vents in the bottom flutes, the openings can be adjusted from .25% - .75%
  • Types EHD-Dek and EHDV-Dek are ICC and UL approved
EHD-Dek, EHDV-Dek Form Deck
EHD-Dek, EHDV-Dek Form Deck dimensions
1.5FD Form Deck

Type 1.5FD form deck is used extensively in floor construction as an economical form to support concrete slabs during construction. Specifying 1.5FD deck may eliminate the need for expensive temporary shoring. Floor systems using 1.5FD deck enable the designer to space the structural members to over 10′-0″ on center.

  • Available with nested side laps only
  • 1.5FD is ICC and UL approved
1.5FD Deck
1.5FD deck dimensions
1.5FDR, 1.5FDV, 1.5FDI, 1.5FDIV Form Deck

Type 1.5FDR form deck is also used in floor construction as an economical form to support concrete slabs during construction. Specifying 1.5FDR deck may eliminate the need for expensive temporary shoring. Floor systems using 1.5FDR deck enable the designer to space the structural members to over 10′-0″ on center.

  • Available with nested side laps, types 1.5FDR and 1.5FDV or interlocking side laps, types 1.5FDI and 1.5FDIV
  • Available as a vented deck, types 1.5FDV and 1.5FDIV are manufactured with slot vents in the bottom flutes, the openings can be specified from 0.5% up to 1.5% of total surface
  • Also available with rolled-in hanger tabs (non-vented types only)
  • 1.5FDR, 1.5FDV, 1.5FDI and 1.5FDIV are UL approved. 1.5FDR and 1.5FDI are ICC approved
1.5FDR Deck
1.5FDR deck dimensions
SD-Dek, SDV-Dek Form Deck

SD-Dek is a 1 1/2″ deep, permanent form deck system for reinforced concrete (145pcf normal weight) slabs. The deck system can also be used as a roof or lightweight insulating concrete roof deck system.

  • Available in four (4) steel gage thicknesses
  • Available as a vented deck, type HDV-Dek is manufactured with slot vents in the bottom flutes, the openings can be adjusted from .25% - 1.5%
  • Types SD-Dek and SDV-Dek are ICC and UL approved
SD-Dek, SDV-Dek Form Deck
SD-Dek, SDV-Dek Form Deck dimensions
SD-Dek Inverted Form Deck

SD-Dek Inverted is a 1 1/2″ deep, permanent form deck system for reinforced concrete (145pcf normal weight) slabs. The deck system can also be used as a roof or lightweight insulating concrete roof deck system.

  • Available in four (4) steel gage thicknesses
  • Types SD-Dek Inverted are ICC and UL approved
SD-Dek Inverted Form Deck
SD-Dek Inverted Form Deck dimensions
2.0FD Form Deck

Type 2.0FD form deck is used in floor construction as an economical form to support concrete slabs during construction. Floor systems using 2.0FD deck enables the designer to space the structural members to over 14′-0″ on center without any additional shoring.

  • Available with interlocking side laps only
  • Also available with rolled-in hanger tabs
  • 2.0FD Form Deck is ICC and UL approved
2.0FD Deck
2.0FD deck dimensions
3.0FD Form Deck

Type 3.0FD form deck is used in floor construction as an economical form to support concrete slabs during construction. Floor systems using 3.0FD deck enables the designer to space the structural members to over 16′-0″ on center without any additional shoring.

  • Available with interlocking side laps only
  • Also available with rolled-in hanger tabs
  • 3.0FD Form Deck is ICC and UL approved
3.0FD Deck
3.0FD deck dimensions