DECK

New Millennium Building Systems produces a wide range of floor and roof deck at the Butler, Indiana and Lake City, Florida manufacturing facilities. Our Salem, Virginia location will also be producing deck by the third quarter of 2007. This web site contains information on all the products currently being produced, for use by specifying engineers and architects. Deck is available in lengths from 6'-0 to 50'-0. Extra charges are applied to lengths less than 6'-0.

• Roof Deck
• Form Deck
• Composite Deck

We offer primer-painted or galvanized deck finishes. The standard primer-painted finish is gray on both the top and bottom sides. The galvanized finish is available in G40, G60, & G90 coatings. Deck can also be furnished with a two coat bright white primer bottom side combined with either a primer-painted or galvanized top side. The primer-painted finish is intended to protect the steel for a reasonable installation period while exposed to ordinary atmospheric conditions and shall be considered an impermanent and provisional coating. Always store deck off the ground with one end elevated and protected from the elements with a weather-proof covering that is ventilated to avoid condensation.

ROOF DECK
B Deck

• B Deck provides the best balance of strength and economy of all the 1-1/2 inch deep roof decks.  Rigid insulation must be a minimum of 1 inch thick for B Deck to be used.
• Available with nested side-laps only. 
• Available as an Acoustic deck. 
• B Deck is Factory Mutual Approved, BA is not covered under Factory Mutual. 
• Available finishes are prime painted or galvanized.  The standard prime-painted finish is gray on both the top and bottom side.  The galvanized finish is available in G40, G60 & G90 coatings.   
• B Deck can also be furnished with a two coat bright white primer bottom side combined with either a prime painted or galvanized top side. 
• The prime-painted finish is intended to protect the steel for a reasonable installation period while exposed to ordinary atmospheric conditions and shall be considered an impermanent and provisional coating.

N Deck

• N Deck is well-suited for applications where it is desirable to space the supporting members as far apart as possible.  This is often the case in structures such as gymnasiums where it is usually more economical to minimize the number of long span structural members by using N Deck to span large spaces. 
• Available with nested side-laps only. 
• Available as an Acoustic deck, type NA. Neither N nor NA is covered under Factory Mutual. 
• Available finishes are prime painted or galvanized.  The standard prime-painted finish is gray on both the top and bottom side.  The galvanized finish is available in G60 & G90 coatings. 
• N Deck can also be furnished with a two coat bright white primer bottom side combined with either a prime painted or galvanized top side. 
• The prime-painted finish is intended to protect the steel for a reasonable installation period while exposed to ordinary atmospheric conditions and shall be considered an impermanent and provisional coating.

FORM DECK
.6 FD

• The .6FD form deck is used extensively in floor construction as an economical form to support concrete slabs during construction.  Specifying .6FD deck eliminates the need for expensive temporary shoring.  Floor systems using .6FD are some of the most economical floor available.
• Available with nested side-laps only. 
• Available finishes are galvanized.  The standard prime-painted finish is gray on both the top and bottom sides.  Galvanized deck is available in G60 & G90 coatings.  For an extra charge, 1.0FD form deck can be furnished with a two-coat bright white primer bottom side combined with either a gray primer or G60 galvanized top side.
• The prime-Painted finish is intended to protect the steel for a reasonable installation period while exposed to ordinary atmospheric conditions and shall be considered an impermanent and provisional coating.

1.0 FD

• 1.5 CD deck has embossments in the vertical ribs that bond with the concrete slab to develop a composite floor system.  The 1.5 CD composite deck acts as a form during the concrete pour enabling the designer to space the structural members to over 10'-0" o.c. without any additional shoring.  Once the concrete cures, the resulting composite floor system provides superior strength and stiffness. 
• Available with nested side-laps only. 
• Available finishes are prime painted or galvanized.  The standard prime-painted finish is gray on the top and or bottom side.  The galvanized finish is available in G40, G60 & G90 coatings. 
• 1.5 CD deck can also be furnished with a two coat bright white primer bottom side combined with either a prime painted or galvanized top side. 
• The prime-painted finish is intended to protect the steel for a reasonable installation period while exposed to ordinary atmospheric conditions and shall be considered an impermanent and provisional coating. 
• Also available with rolled in hanger tabs

1.5 FD

• The 1.5FD form deck is used extensively in floor construction as an economical form to support concrete slabs during construction.  Specifying 1.5FD deck eliminates the need for expensive temporary shoring.  Floor systems using 1.5FD enable the designer to space the structural members up to 7'-0" o.c.. 
• Available with nested side-laps only. 
• Available finishes are prime-painted or galvanized.  The standard prime-painted finish is gray on both the top and bottom sides.  Galvanized deck is available in G40, G60 & G90 coatings.  For an extra charge, 1.5FD form deck can be furnished with a two-coat bright white primer bottom side combined with either a gray primer or G40 galvanized top side. 
• The prime-painted finish is intended to protect the steel for a reasonable installation period while exposed to ordinary atmospheric conditions and shall be considered an impermanent and provisional coating.

COMPOSITE DECK

1.5 CD

• 1.5 CD deck has embossments in the vertical ribs that bond with the concrete slab to develop a composite floor system.  The 1.5 CD composite deck acts as a form during the concrete pour enabling the designer to space the structural members to over 10'-0" o.c. without any additional shoring.  Once the concrete cures, the resulting composite floor system provides superior strength and stiffness.  
• Available with nested side-laps only. 
• Available finishes are prime painted or galvanized.  The standard prime-painted finish is gray on the top and or bottom side.  The galvanized finish is available in G40, G60 & G90 coatings. 
• 1.5 CD deck can also be furnished with a two coat bright white primer bottom side combined with either a prime painted or galvanized top side. 
• The prime-painted finish is intended to protect the steel for a reasonable installation period while exposed to ordinary atmospheric conditions and shall be considered an impermanent and provisional coating. 
• Also available with rolled in hanger tabs

2.0 CD

• 2.0 CD deck has embossments in the vertical ribs that bond with the concrete slab to develop a composite floor system.  The 2.0 CD composite deck acts as a form during the concrete pour enabling the designer to space the structural members to over 12'-0" o.c. without any additional shoring.  Once the concrete cures, the resulting composite floor system provides superior strength and stiffness. 
• Available with interlocking side-laps only. 
• Available finishes are prime-painted or galvanized.  The standard prime-painted finish is gray on the top and or bottom side.  The galvanized finish is available in G40, G60 & G90 coatings.   
• 2.0 CD deck can also be furnished with a two coat bright white primer bottom side combined with either a prime painted or galvanized top side. 
• The prime-painted finish is intended to protect the steel for a reasonable installation period while exposed to ordinary atmospheric conditions and shall be considered an impermanent and provisional coating. 
• Also available with rolled in hanger tabs

DECK CERTIFICATIONS

• Steel Deck Institute Member Company fully approved to manufacture roof deck, form deck, and composite floor deck.
• B deck is Factory Mutual approved for use as a component in Class 1-60, 1-75, & 1-90 wind uplift steel roof deck construction.
• Deck products are approved by Underwriters Laboratory and listed in the UL Fire Resistance Directory.
• All acoustical deck has been tested in accordance with ANSI ASTM C423 & E795 to determine the noise reduction coefficient (NRC) rating.